Laurentide SynthWorks
  • MU/Dotcom
    • Baal
  • STORE

BOM

Download BOM as a .xlsx spreadsheet and import it into Mouser.  Everything (except the LED's) can be bought at Mouser.  If you purchase the Pre-Programmed Chips from here, delete the ATMega644p and 512kb EEPROM from the BOM.  


Preprogrammed chips (ATMEL & EEPROM) can be purchased from Modular Addict (set only).

BUILD DOC

NOTE: The build doc was constructed around the full kit version


SILKSCREEN ERROR

2 values were not printed on the PCB
  • D1: 1N4148 Diode
  • R1: 10k Resistor
Picture



SAFETY PRECAUTIONS

If you are using the Control PCB with the 4PM Filter PCB, it is a good idea to trim the switch and resistor array legs that will sit just above the voltage regulators on the 4PM PCB.  Do this before joining the 2 boards together.  Maybe even put a small bit of electrical tape, or the like over the cut leads, just to be safe.

Picture

REFERENCE IMAGES

Picture

Copyright © 2019 Laurentide SynthWorks